Grass Valley Kayenne XL Package v.7.0.4 - Manual (Page 76)

74 Kayenne XL Package — User Manual
Section 2 — Concepts
Bias Control
The BIAS control determines whether the path will be pulled towards the
previous or the following keyframe. With extreme settings, all of the
biasing will occur either before or after KF2. With bias set to 0 (zero), the
curve through the keyframe is gentle as shown in
Figure 42 .
Note A Tension vector must be present for Bias control to be available.
Figure 42. Bias Control Setting Zero
Bias = 0.0
KF1
KF2
KF3
Bias
Vector
Tension
Vector
+
-
0721_06_53_r0