Grass Valley Kayenne XL Package v.7.0.4 - Manual (Page 128)

126 Kayenne XL Package — User Manual
Section 3 — Control Panel
Display
If no editing function or store function is selected, the ?? digit display of the
subpanel may show the following indications:
REG 24
SNAP 05 SN05 ----
SNAP 05 ABCD EFGH
TL 16 TL16 ----
TL 16 KLMN OPQR
Enabling and Disabling Direct Mode
The Direct Mode in the EMEM panel permits access to a stored snapshot or
timeline with a single button (hotkey). The bank number is the tens digit of
the register. The hotkeys are the units digits of the register. The Direct Mode
may be enabled during storing, but this does not have any particular ben-
efit.
• Enabling Direct Mode 
The Drc button toggles between on and off. If the direct mode is on, the
Bnk button becomes active. Press this button to select a bank


Example: snap b05 sn05 ----
• Disabling Direct Mode 
Press the lighting Drc button.
Register 24 is selected
Register 05 is selected. The register
contains a snapshot and has no
particular name.
Register 05 is selected. The register
contains a snapshot with the name
“ABCDEFGH”. The name can only
be entered in the menu.
Register 16 is selected. The register
contains a timeline and has no
particular name.
Register 16 is selected. The register
contains a timeline with the name
“KLMNOPQR”. The name can only
be entered in the menu.