Grass Valley Kayenne XL Package v.7.0.4 - Manual (Page 122)

120 Kayenne XL Package — User Manual
Section 3 — Control Panel
DPM (Digital Picture Manipulator)
In DPM mode the local EMEM panel serves for recalling and editing DPM
effects. For general information on the DPM structure in the Kayak HD
system, refer to
DPM Menu on page 544 .
Figure 78. Editing Mode
Recalling a Register
Effects can be recalled in two different modes:
• Register Mode is an input mode for the register number in the Effects
subpanel, in which the number is entered in one-digit (0 ... 9) or two-
digit format (10 ... 99) Subsequently the Cut button is pressed. Do not
use the Enter button for confirmation.
• Direct Mode is an input mode for the register number in the Effects sub-
panel. The bank number 0 ... 9 corresponds to the tens digit of the reg-
ister number. When the units digit of the register number is entered, the
corresponding effect is recalled immediately.
To run an effect in either mode, just press the Cut button.