Grass Valley Kayenne XL Package v.7.0.4 - Manual (Page 310)

308 Kayenne XL Package — User Manual
Section 4 — Sidepanel Menu Summaries
Router Page
The Kayak HD system can interface with an external routing system such
as Encore, Jupiter and Pro-Bel automation systems. A routing system con-
nects a router source (router input) to a router destination (router output).
Changing the router source sends a different signal to the destination
(called a take). A router destination can in turn be connected to a Kayak HD
mainframe input and be configured as a routed switcher source. The router
acts as a pre-selector for the switcher source, and so increases the number
of inputs available to a button on a Kayak system bus.
Note Router take commands are applied to single or all router levels depending on
the configuration. The external routing system's destinations must be config-
ured correspondingly.
The following control features are supported in Kayenne XL:
• Supports 32 router output channels
• Destination Assignment
• Level Assignment (Encore, Pro-Bel)
• Source name transfer
• Source name and configuration change notification
The Router menu page is used to setup your Kayenne XL for control of an
external router system. In the Crosspoint Control pane the used serial port,
the router protocol type and additional router options can be selected. In
the Mnemonics Transfer pane the additionally necessary serial port for the
source name transfer with Jupiter can be selected.