Grass Valley Kayenne XL Package v.7.0.4 - Manual (Page 416)

414 Kayenne XL Package — User Manual
Section 4 — Sidepanel Menu Summaries
Ext. DVE Page
The menu page serves to control up to two external DVEs and the internal
DPM processor as well.
For DVE control, the AUX buses supplying the video and key signals have
to be directly indicated in the GVG200 protocol. In order to keep an assign-
ment variable, this menu page is available enabling an AUX bus mapping.
Thus, not only the permanently entered AUX buses can be used but also all
the other AUX buses.
Each time the DVE Key and Fill source are assigned to AUX buses (that is
the normal way working with the DVE), the DVE Fill source is changed at
the AUX bus selection. The coupled key source is set on the corresponding
DVE Key bus. This coupling can be activated or deactivated with the
parameter Key Bus Coupled On/Off.
Figure 335. Config E-Box extern DVE