Grass Valley Kayenne XL Package v.7.0.4 - Manual (Page 379)

Kayenne XL Package — User Manual 377
Config Menu
4. Hold down the key PVW button 2 seconds and keep the key preview
button pressed, and select the keyer which you want to see at the
preview output, using the key delegation button. When you hold down
the key preview button for more than 2 seconds, all keyers involved in
the key are indicated by the highlighted key delegation buttons.
5. Toggle the key PVW button until the lamp turns off, and now you will
see a combined key signal from the preview output of the used M/E
bank.
Note Please note that the default Look Ahead preview mode is not available in the
Combined Key Signal mode.
• Black Preset Abort (On/Off): 
When another program source is selected, a currently running transi-
tion with BLK PST on is aborted, the
BLK PST button lamp turns off, and
the selected source is taken as program.
• Transition Abort (On/Off): 
When another program source is selected, a currently running transi-
tion is aborted, and the selected source is taken as program.
• FTB Cancel (On/Off): 
When another program source is selected, an active fade-to-black is
instantly cancelled, so that the image with the selected source is visible
on that stage‘s program output. This is available only in non-layered
mode.
• Auto Transition Abort Inhibit (On/Off): 
In On state, an Auto Transition can not be paused by pressing the Auto
button again.
• Enable Transition Trigger Preset Bus: Enable Transition Trigger Preset /
Program bus.