Grass Valley Kayenne XL Package v.7.0.4 User Manual
Page 412
410
Kayenne XL Package — User Manual
Section 4 — Sidepanel Menu Summaries
GPI Functions
•
None: GPI has no function.
•
Command: User-defined command code. See note below.
•
Misc: Switch over the Video Standard or Video Format. This is redun-
dant function because the switcher can auto detect the video standard
from the signal at the reference input.
•
Video Format (4x3, 16x9)
•
Inactive = 4x3
•
Active = 16x9
•
Video Standard (625/50, 525/60)
•
Inactive = 625/50
•
Active = 525/60
•
Auto transition: Starting Auto Transition, selected in the pop-up list
•
Recall Snapshot: Starting Snapshot, selected in the pop-up list
•
M/E1: Starting function, selected in the pop-up list
•
M/E2: Starting function, selected in the pop-up list
•
M/E3: Starting function, selected in the pop-up list
•
PP: Starting function, selected in the pop-up list#
•
Stores: Starting Video Store or MPR Store, selected in the pop-up list
Note
In Command mode, user-defined commands are selected and are transmitted
to the switcher at a received trigger event. Selecting Command enables you
to directly enter the command code. For this purpose, refer to the
DD35
command set, which can be obtained from the manufacturer. The other selec-
tions are defined in the text files
GPICMDMF.TXT
(mainframe) and
GPICMDCP.TXT
(panel). These files are contained in the directory
c:/programme/dd35/bin
.
Note
When entering commands, a special syntax has to be considered. It is pos-
sible to add predefined parameters to a command. The available commands
are listed in the files mentioned above. For editing, it is best to copy and
match existing entries. In any case, the
DD35/XtenDD
command set is
required.