Grass Valley Kayenne XL Package v.7.0.4 User Manual
Page 306
304
Kayenne XL Package — User Manual
Section 4 — Sidepanel Menu Summaries
Figure 237. Install E-Box Extern DVE Delay
•
Tally: Define the tally properties
•
Internal means that every time the DVE is On-Air, the Sources on the
feeding Aux Buses get an on-air tally too. No external wiring
needed.
•
External means that the DVE (the inputs in INSTALL--EBOX--DVE)
AND the tally-in for the feeding Aux Buses must be on-air to get the
feeding sources on-air. This covers when the DVE is ON through a
key but the image on the DVE is invisible. The DVE however must
supply an appropriate Tally signal.
•
External Only means that the switcher just propagates the Tally-In of
the feeding Aux Buses. Any logic must be wired externally. Or must
be done inside the DVE.
Figure 238. Install E-Box Extern DVE Tally
•
Video / Key Send: The video and key sends define which Aux Buses the
switcher is using to feed the inputs of the DVE. These would normally
be fed to inputs 1 and 2. In the example, Aux 10 and Aux 11 are being
used. Again, this information is needed for the DVE LOOP. More Aux
Buses can be used to feed multiple channel DVEs.
Figure 239. Install E-Box Extern DVE Key Send Aux