Grass Valley Kayenne XL Package v.7.0.4 - Manual (Page 248)

246 Kayenne XL Package — User Manual
Section 3 — Control Panel
Input (Aux - Non Page Mode)
Figure 181. Multi Function 33
While Page mode is not enabled, the lower 2 digipots are controlling the
selectable Aux buses and the available crosspoints.
Pressing either digipot will open the numeric keypad, in order to enable
numeric entries to select Aux-Bus number and Aux-Bus crosspoint.
When pressing and holding the button Perm (Permanent Input to Aux Bus)
and also pressing the lower digipot (crosspoint selector), the selected cross-
point will toggle the function "Permanent Input" for this particular Aux-
Output On/Off, and this is indicated on the button Perm. When a desig-
nated Aux-Bus is already in "Permanent" mode, the related display will
change from "Aux-XX" to "Perm-XX".
The Titl (Safe Title) and Cntr (Center-Cross) buttons are delegating related
controls to the digipots, when pressing and holding together with the
lower digipot. Pressing the Titl or Cntr button again will turn the digipots
back to Aux selection.
Aux Bus crosspoint selection Page mode button
Aux Bus Selection
Last