Grass Valley Kayenne XL Package v.7.0.4 - Manual (Page 113)

Kayenne XL Package — User Manual 111
Transition Control
Transition Rate using the numeric key pad at local EMEM panel and press
the save button. All selected components (Status for selected is a none
flashing button) are now changed to the new Transition Rate.
Other Transition Control Interactions
The Transition Lever Arm can be used in combination with the Auto Trans or
Cut
button to perform a main transition. For example, you can start the tran-
sition by moving the lever off its limit, and finish the transition by pressing
Auto Trans . Moving the lever part way, then pressing Cut
will complete the
transition with a cut. The lever arm will be resyncronized by recalculating
the resting lever arm way to complete the transition in the direction of the
arrow. Moving the lever arm in the opposite direction enable you to resyn-
cronize the arm to an end position without affecting the output signal.