Grass Valley Kayenne XL Package v.7.0.4 - Manual (Page 182)

180 Kayenne XL Package — User Manual
Section 3 — Control Panel
Note The machines within the list of assigned devices are sorted in alphabetical
order
To remove a device from the list, do the following:
• Select the device ('bring it to top') as described in the previous section.
• Hold down Prev and Next buttons together and press (not hold) the
device selection button on the Machine Control module where the
device to remove is assigned to.
• Alternatively hold down Prev and Next buttons together and press a
source where the device to remove is attached on the Source Selection
Module.
Note Device assignments on machine control groups can be saved/loaded to/from
a Panel Memory registers.
Temporary Machine Delegation
A machine that has been assigned to a machine control window of the Sys-
tembar can be temporary delegated to the Machine Control Module for full
control. This feature is described in details within the Machine Control sec-
tion.
Machine Delegation Busses
In addition to the manual selection of machines within a list of assigned
device, it is possible to bring a device on top of a machine control group for
controlling by the 'Machine Delegation Busses' feature:
A Machine Delegation Bus is a ME or an Aux bus where sources (con-
taining attached machines) can be associated. This source association is
done in the Kayenne XL Menu (Config/EBox/Input/MachineDelegationBusses).
In the association process one ore more Machine Delegation Busses can be
assigned to an input source.
When an input source is selected on a ME or an Aux, the system checks if
the related bus is associated with the selected source and in addition it ver-
ifies if the source has a machine attached. If this is the case, it searches all
machines assigned to the machine control groups in the Systembar for the
attached machine and if found, it is brought on top for control.