Grass Valley Kayenne XL Package v.7.0.4 - Manual (Page 92)

90 Kayenne XL Package — User Manual
Section 3 — Control Panel
The default mapping of a 4M/E switcher will be, from right to left:
• Button 35: Row delegation button
• Buttons 33 and 34: Shift buttons
• Buttons 30, 31, and 32: M/E re-entry buttons
The button of the selected input is highlighted. If the input is assigned to a
button in a non-selected level, the button is blinking. That feature can be
disabled ("Shift level hidden source blinking").
Row Delegation
• Row delegation buttons are generally mapped to the rightmost source
select button.
• The color of each delegation button is set to indicate the current delega-
tion. Its color is set to match the color of the bus select button, aux select
button, macro select button, router select button, etc.
• The Source Name Display associated with the row delegation button
indicates the name of the bus or the function (for example KEY2, MCRO,
BGDB, UTIL2).
• Initially the rows are delegated as follows:
• Row 1: KEY1
• Row 2: KEY2
• Row 3: BGDA
• Row 4: BGDB
The following rows can be selected by pressing the corresponding row
selection button: Macro, Aux, Router, Define Memo, eDPM
The previous selection occurs by pressing that button again.
For KEY1...KEY6, BGDA, BGDB, UTIL1, UTIL2, EMEM the row will be delegated
temporarily as long as the selection button is pressed. A static delegation
can be done by pressing the row delegation button and the row selection
button simultaneously.