Grass Valley Kayenne XL Package v.7.0.4 - Manual (Page 597)

Kayenne XL Package — User Manual 595
DPM Menu
Creating a Simple Zoom Effect Using eDPM Channels
Proceed as followed:
1. Set first keyframe = Size 0 %.
2. Set second keyframe = Size 100 % (set all to Default).
3. Save effect and rename "Zoom". Effect duration is supposed to be 1
second.
4. Enable eDPM-1 Send signals in Config - E-Box- M/E, for example, for
M/E1.
5. Activate Return Key 6 in M/E1 Main menu.
6. Select for Transition - eDPM - eDPM1 - Channel-1 in M/E1 Main menu.
7. Re-program a button in the Transition module of M/E1 in order to use
it as Next Transition Type - eDPM1.
8. Pick two reasonable crosspoints in Program and Preset bus of M/E1
and set Next Transition to Background only, Transition Type = eDPM-1.
9. Now the Auto Transition button and the Lever-arm/Fader can be used
to control the eDPM-1 Transition.
10. Any duration time in the Transition Module can be entered to run the
eDPM-1 effect.
11. Changing the "BGD DVE" between PGM and PST will change the Run-
Direction.
12. The created effect also can be used for a keyer transition.
13. Also pre-combined signals can be effected with the eDPM (for example,
BGD + Key1 + Key2).
Note In order to contain a combination of Keyer1-4 into a pre-combined send
signal, then - in terms of priority settings - they have to be next to each other.
Copying of DPM Channels
This copy feature enable you to copy DPM channels in different modes:
• Copy of DPM channels within an effect.
• Copy of DPM channels between different effects, using the clipboard.