Grass Valley Kayenne XL Package v.7.0.4 - Manual (Page 54)

52 Kayenne XL Package — User Manual
Section 2 — Concepts
Shadow offset, range, and density controls are also available that offer
control over the placement and appearance of the added shadow.
Preset Pattern
A preset pattern uses a wipe pattern generator, rather than an incoming key
cut signal to define the hole cut in the background. Key clip and gain con-
trols are not available for a preset pattern, but controls over the location,
size, border, opacity, and edge softness are available.
Figure 15. Preset Pattern
Split Key
A split key uses an alternative key cut signal for keying. On the Kayak HD
system, a key split is performed by holding down the
Key Split
button and
selecting the desired key cut signal.
Split keys should normally treat the fill as unshaped since by definition a
split key uses a fill that is not related to the cut; that means the normal mode
for keying is Luminance or Linear Key Mode.
Properly and Improperly Shaped Video
The following illustrations show the results of using correctly and incor-
rectly shaped video. In these examples, the video fill comes from a DPM
that provides both a key signal and a fill video signal (a linear key). The
Pattern Key Cut
Key Fill
Background
Background with Preset Pattern Inserted
0618_00_71_r1