Grass Valley Kayenne XL Package v.7.0.4 User Manual
Page 448
446
Kayenne XL Package — User Manual
Section 4 — Sidepanel Menu Summaries
MultiMix Mode
If the MultiMix mode is enabled in the Sidepanel‘s Config - E-Box menu, the
MultiMix will be activated.
The MultiMix mode is EMEMable, i.e. the settings are stored with the
EMEM parameters.
The buttons Limit Set and On are active also when MultiMix is enabled.
Note
Limit On works only if a “Limit“ has been set in advance.
BlkPSTMode
The
BlkPST Mode
button permits selection of different modes of fading.
Trans Type
The
Trans Type
button permits selection of different types of transitions:
To select a transition type, activate the button and then select a transition
type with the overlay button
Undef, Mix, Add, Wipe1, Wipe
2 or
DVE
.
The selected transition type is displayed in the button header area.
Note
You can only change the transition type when the transition is finished, i.e.
when an automatic transition has been completed or the fader is in end posi-
tion.
Misc Transition (Misc Func 1 - 6)
One Misc component can run the RamRecorder channels DPM's in parallel,
using the Auto Transition Button or the Lever Arm.
When the selected effect contains other channels than the selected one, all
channels of this effect will be controlled.