Config main submenu, Application control – Grass Valley Kayenne XL Package v.7.0.4 User Manual
Page 363
Kayenne XL Package — User Manual
361
Config Menu
Config Main Submenu
The Config Main Submenu consists of 3 subpages:
•
Application Control: Details refer to
•
Copy Config Menu: Details refer to
.
•
Copy Config Detailed Menu: Details refer to
.
Application Control
The Config Main menu is designed to handle the use of applications within
a Kayenne XL system.
The Config Main menu shows the currently running application of the
Sidepanel connected to the mainframe and a list of applications (Available
Applications) stored on the local hard disk which is located in the Panel
Control Unit (PCU).
Applications can be loaded or stored by using the Load or Save/Save As
button. If Running Application is selected, the currently running application
(marked blue) can be stored to the local hard disk.
In order to load an application, select the application you want to use from
the Available Applications list box and press the Load or Advanced Load button
at the bottom of the menu. The list box Available Applications has two ver-
tical sections. At the top there is a short section that shows the last loaded
applications to the mainframe (up to four). The applications are displayed
in loading order with the latest one at the top. Below there is a complete list
of all applications available on the hard disk. The applications are listed in
alphabetical order. Each entry consists of an application name, a creation
date and time.
The Content Overview list displays the register resources of the control panel
(Macros) and the mainframe (EMEM, iDPM, eDPM).