Remote p-bus submenu – Grass Valley Kayenne XL Package v.7.0.4 User Manual
Page 487
Kayenne XL Package — User Manual
485
Remote Menu
Remote P-Bus Submenu
Figure 398. Remote Peripheral Bus
The P-Bus enables you to manually trigger machines defined in the
Install/
E-Box/P-Bus
menu. At present, only 1 trigger can be output on the P-Bus, that
then reaches all machines for which in this case a trigger is adjusted.
In the 1st line of the table, the trigger number is present (can be used, but
must not). In the other lines, this trigger number is adjusted for the respec-
tive machines.
The popup of each machine provides the following selection possibilities:
No Command
—This machine does not get any trigger
Default Command
—This machine gets the trigger number being in the 1st line
All other lines
—Here, each trigger is specified with the name being provided
for this machine. A selection in this area also changes the general trigger
number in the first line, which is then applicable for all machines.