Grass Valley Kayenne XL Package v.7.0.4 User Manual
Page 136
134
Kayenne XL Package — User Manual
Section 3 — Control Panel
Changing the Hold Time of a Snapshot or Keyframe
The following procedure is used:
1.
Select
Keyframe / Snapshot
(button <-- and -->).
2.
Press HTM.
3.
Enter hold time with numeric keypad.
4.
Press Enter.
Note
Errors can be deleted with Clear.
Changing the Transition Time of a Snapshot or Keyframe
The following procedure is used:
1.
Select transition object.
2.
Press
TTM
.
3.
Enter transition time with numeric keypad.
4.
Press
Enter
.
Note
Errors can be deleted with Clear.
Inserting a Loop in a Timeline
If a loop is inserted in the Effects subpanel, always an endless loop (loop
counter = 000) is inserted for default. To change the loop counter, follow the
steps in the section
Modifying a Loop in an Existing Timeline on page 135
.
Note
It is possible to insert loops (max. 99) into other loops. This functionality is
only available with the menu operation.
Entering a Loop During the Generation of a Timeline
The following procedure is used:
1.
Enter last timeline object before the loop.
2.
Press
LOOP
.
3.
Enter first timeline object in the loop.