Grass Valley Kayenne XL Package v.7.0.4 - Manual (Page 340)

338 Kayenne XL Package — User Manual
Section 4 — Sidepanel Menu Summaries
Standard Configuration Operating two Kayak HD Mainframes
Simultaneously.
If one workplace should operate two Kayak HD Frames simultaneously,
another Kayak HD video mainframe driver KHD2 has to be added to the
existing Workplace 1. This KHD2 driver gets another unique IP address
(here 192.168.0.146). Optionally a second Sidepanel GUI (192.168.0.147)
can be attached to the KHD2 driver to complete the operational interface to
the second frame.
This configuration enables all the M/E stripes of Workplace 1 to have full
control to all M/Es of the two frames. The Frame-, M/E- and Bus delega-
tions are stored persistent and can be saved in the common panel memory
delegation storage. Each Makro learned on Workplace 1 can learn com-
mands across the two frames and recall them later on. When delegating
through the various M/Es, the Input Button Assignment and Color Assignment
is following the related settings of the Kayak HD video mainframe.
Figure 274. Standard Workspace with two Mainframes
The figure above shows a second Kayak HD driver added to the Workplace
1.
To change workplace configurations you have to enter the Install - Panel
menu first. This menu does not allow you to change workplace configura-
tion. To get workplace configuration access you have to enter the Menu ID
number "40800" manually.
Panel Control Unit: „Kayenne XL-144 – 192.168.0.144 “
Workplace: „ Workplace 1 – Port 1..8 "
Driver: „KayenneXL – KHD1 – 192.168.0.144 (Auto)“
PCU Data:
- Color Palette
WP Data:
- Makro
- Panel Memory
Driver Data:
- Source Button Assignment
- Color Assignment
Sidepanel GUI:
„192.168.0.145"
attach
Kayak Video Frame
„192.168.0.242"
connect
connect
Driver: „KayenneXL – KHD2 – 192.168.0.146 “
Driver Data:
- Source Button Assignment
- Color Assignment
Sidepanel GUI:
„192.168.0.147"
attach
Kayak Video Frame
„192.168.0.231"
connect
connect