Grass Valley Kayenne XL Package v.7.0.4 - Manual (Page 177)

Kayenne XL Package — User Manual 175
System Bars
Switched Preview
Before the Switched Preview feature can be used, an Aux Preview Bus has to
be defined and Auto Aux Preview has to be enabled. These parameters are set
within the Config/EBox menu. The Switched Preview buttons are used to
select the M/E output which is routed to the defined aux preview bus.
Figure 118. Switched Preview
When pressing the Switched Preview buttons (M/E1, M/E2, M/E3, M/E4,
PGM, eDPM), the following outputs will be 'toggled' per M/E:
• Main
• Out B
• Out C
• Out D
• Preview 1
• Preview 2
The button of the currently previewed M/E will be tallied high.
The last two buttons of the Switched Preview group are currently not used.