Grass Valley Kayenne XL Package v.7.0.4 - Manual (Page 192)

190 Kayenne XL Package — User Manual
Section 3 — Control Panel
Keyer Control
Figure 130. Multi Function - Keyer Control
When the Main Keyer menu is entered, the Multi-Function module repre-
sents the actual settings of the selected Keyer.
Key Preview
The PVW button is used for viewing the key control signal. This button does
not affect the output of the M/E. Pressing the button once shows, on the
preview output, the key signal in front of the background. Pressing the
button a second time shows the key signal.
When changing any M/E's preview mode from "Look-Ahead Preview" to
"Combined Key Signal", press and hold the PVW button in a Keyer Main
menu of related M/E# and select/deselect the Keyers which should be dis-
played on that M/E preview output. After finishing selection, press the
PVW button in order to cycle through available M/E-Preview output states.
Note While an M/E# PVW output is configured to be in "Combined Key Signal"
mode (Config/E-Box/M/E/Preview Output), the
PVW button in Keyer Main
menu at the Multi-Function modul of the related M/E# will stay lit perma-
nently.
Keyer delegations/selections PVW / Preview button
Mode= Clip/Gain toggle for Clip High/Clip Low controls
Last