Grass Valley Kayenne XL Package v.7.0.4 - Manual (Page 315)

Kayenne XL Package — User Manual 313
Install Menu
• SD Reference Input: This parameter is used to select the SD (Standard
Definition) Reference source which can be either the SD Analog Refer-
ence or any one of the serial digital video inputs to the switcher. The
digital input must match the video standard that the switcher is run-
ning.
• HD Reference Input: This parameter is used to select the HD (High Defi-
nition) Reference Input video source which can be either the HD
Analog Reference or any one of the serial digital video inputs to the
switcher. The digital input must match the video standard that the
switcher is running.
Figure 248. Install E-Box Timing SD Reference Input
• HD Auto Preselect: Select Interlaced Mode or Segmented Frame Mode. For
details, refer to section
Select SF Mode on page 314
Figure 249. Install E-Box Timing HD Auto Preselect
• The currently selected video standard is reported in the Current Standard
field on the top menu page.
• The incoming reference signal rate is reported in the External Reference
field.
If you are using Auto Detect, the video standard you have selected persists
until a different video standard is detected and locked for use by the
switcher.
If the reference signal is temporarily lost, the system will continue using the
previous reference standard and a
NONE status will be reported.