Grass Valley Kayenne XL Package v.7.0.4 - Manual (Page 469)

Kayenne XL Package — User Manual 467
Key Menu
Preset Pattern
A preset pattern uses a wipe pattern generator, rather than an incoming key
cut signal to define the hole cut in the background. When Preset Pattern is
chosen as the keyer mode, the menu will appear. When the Pattern data pad
is touched, the Wipe menu (see Wipe Menus) will come up to enable pattern
selection.
The Preset Pattern may be matte-filled by touching the Matte Fill data pad.
The matte controls can be accessed by touching the Mattes button. Opacity
and size of the preset pattern can also be adjusted with the digipots.
Keyer Priority Misc Menu
Touching the Priority Misc subcategory button takes you to the Priority
menu. The Priority menu is used to change the stacking order of the keys.
The parameter control area on the right has two columns, labeled Current
and Next. The stacking order of the selected item in a column is controlled
with the Top, Move Up, Move Down, and Bottom touch buttons. Changing the
top to bottom order in the Current column will cause an immediate change
in that keyers stacking order. The order in the Next column controls the
order the keys will have after the next key priority transition. After the key
priority transition, the Current and Next stacks will swap.
The Key Prior and Key Over buttons in the Keyer subpanel on the panel
provide an alternate method for setting key priority. Refer to the sections
on
Transition Elements on page 107 .
Refer also the Keyer Control section of the Multi Function Control Panel.