Aux bus transitions – Grass Valley Kayenne XL Package v.7.0.4 User Manual
Page 100
98
Kayenne XL Package — User Manual
Section 3 — Control Panel
Aux Bus Transitions
Aux Bus Transition is a new feature introduced with software version V703.
It offers the possibity to execute up to two AUX-AUTO-MIX transitions
simultaneously from any Kayenne XL or Kayak control panel. The AUX
transition control settings Transition Mode and Transition Duration can be
enabled individually per AUX Bus of the video frame and are stored with
the frame's configuration settings.
During an Aux transition, the transition amount is displayed in the LED
display of that module.
Button designation (up to now these buttons were unused):
•
Direct Trans
•
Auto Trans
Refer to
and
In the Aux Transition module, the preset source name is displayed in the so
far unused (empty) OLED row.
•
Line 1: Aux bus number
•
Line 2: Inverted, shows the current source visible at the AUX outputAux
bus name
•
Line 3: Inverted, shows the AUX Transition preset source. A Transition
to this source is executed if the transitions AUTO button is pressed in the
GUI or in Direct Mode when the Auto Trans is pressed.
•
Line 4: Shows the AUX source that is switched to when source button is
pressed while AUX Transition is OFF or transitioned to in case of Tran-
sition Direct Mode.
Note
Please note, that Aux Transition is not available in 4.5 M/E configuration with
SD video standard.