Grass Valley Kayenne XL Package v.7.0.4 User Manual
Page 297
Kayenne XL Package — User Manual
295
Install Menu
To program an Input, select the channel from the scrolling list in the central
pane. Then select Modify to change the parameters:
•
Input Name: Enter a four digit short name.
•
Long Name: Enter a desired long name.
•
Patch to: Option “Software Patch Panel”, Software License Key is
required.
•
Ext. Name: Enable / Disable the name transfer mode with Yes/No.
•
Router Output: Select the router output channel.
•
Router Level: Select the level of the routing system (for example, Prosan
router).
•
Event Preroll: Select a pre roll time.
Note
Preroll is used to delay a command which assigned to an input using the
Event Tab.
•
Event: Assign/create command for On Air execution.
Note
Assigned commands are only executed if transition trigger/cut trigger in the
Config/M/E/Misc. menu is enabled.
Setting Preroll Time
•
Move the cursor to the Event Preroll column and press Modify. A popup
with the predefined pre roll times appears.
Figure 223. Install E-Box Input - Event Preroll
Selecting a Substitution Table
•
Move the cursor to the Event column and press Modify. A popup with the
available substitution tables appears. Refer also to the Config / Panel /
SubstTab menu.
The substitution tables are used for Simulcast mode.