Synthesis & compilation instructions – Altera PCI Compiler User Manual
Page 56
1–22
User Guide Version 11.1
Altera Corporation
PCI Compiler
October 2011
Using the Reference Designs
<path>/pci_compiler/megawizard_flow
/ref_designs/pci_mt64/vhdl
where <path> is the directory in which you installed the PCI Compiler.
synthesis & Compilation Instructions
To compile the pci_mt64 MegaCore Function Reference Design in the
Quartus II software, follow these steps:
1.
Create a new project in the Quartus II software, specifying the top-
level design file as follows:
<path>/pci_compilerv/megawizard_flow
/ref_designs/pci_mt64/vhdl/chip_top.vhd
2.
Add the following directories as user libraries in the Quartus II
software:
/ref_designs/pci_mt64/vhdl/chip_top
Table 1–7. Directory Structure of pci_mt64 MegaCore Reference Design
Directory Name
Description
chip_top
This directory contains a top-level design file that
instantiates the following modules:
●
pci_mt64 MegaCore function variation file
●
Local interface logic
●
SDR SDRAM interface
●
SDR SDRAM controller
pci_top
This directory contains a pci_mt64 MegaCore function top-
level wrapper file. This wrapper file was generated using IP
Toolbench with the following parameters selected using the
Parameterize - PCI Compiler Wizard:
●
BAR0 reserves 1MB of memory space
●
BAR1 reserves 32MB of memory space
pci_local
This directory contains local interface logic files. For more
information on these files, refer to FS 10: pci_mt64
MegaCore Function Reference Design.
sdr_intf
This directory contains files for the interface logic between
the PCI local interface logic and the SDR SDRAM controller.
sdr_cntrl
This directory contains files for the SDR SDRAM controller.