Rockwell Automation DAG6.5.8 APPLICATION GUIDE SCADA SYSTEM - Manual (Page 66)

Publication AG-UM008C-EN-P - February 2005
2-28 Configuring Enhanced PLC-5 Processors
Figure 2.7 Example of a PLC-5 Read MSG to an SLC 500 or MicroLogix Processor
This MSG example tells this PLC-5 (master) to read the information
from SLC 500 (slave) 13
10
(15
8
) S:1 and place the information in its
N15:0 file.
Ladder Rung
Control Block
MSG being sent to an SLC 500
or MicroLogix processor.
MSG being sent out channel 0
(must use MG file type).