Rockwell Automation DAG6.5.8 APPLICATION GUIDE SCADA SYSTEM - Manual (Page 252)

Publication AG-UM008C-EN-P - February 2005
7-26 Configuring Logix Controllers
Figure 7.5 Viewing Local DF1 Diagnostic Counters
Figure 7.6 Resetting Local DF1 Diagnostic Counters
2. From the Edit Tag
tab, create a
controller tag of
type INT [19].
[18]
3. Create the
necessary ladder
logic to copy the
Diagnostic
Counter system
values to the tag
you just created
(SerialPortStatus).
4. Create a message
instruction to clear
the Diagnostic
Counter system
values.
5. Enter in the field
values exactly as
shown.