Rockwell Automation DAG6.5.8 APPLICATION GUIDE SCADA SYSTEM - Manual (Page 417)

Publication AG-UM008C-EN-P - February 2005
Index 7
Remote station driver
MicroLogix 1100/1200/1500 3-13,
3-21, 3-23, 3-40
SLC 5/01 and 5/02 5-7
SLC 5/03, 5/04 or 5/05 4-41
SLC 5/03, 5/04, and 5/05 4-11, 4-20,
4-23
Retries
MicroLogix 1100/1200/1500 3-14,
3-22, 3-24
SLC 5/03, 5/04, and 5/05 4-13, 4-21,
4-24
RS-232 Glossary-4
RSlinx 9-1
Configuring
Master Station 9-1
Slave Station 9-10
RTS
definition Glossary-4
RTS off delay 3-13, 3-22, 3-24, 4-13,
4-21, 4-24
RTS send delay 3-14, 3-22, 3-24, 4-13,
4-21, 4-24
RTU
definition Glossary-4
RXD
definition Glossary-5
S
Sample Ladder Logic E-1
Logix
DF1 Half-Duplex Master Mes-
sage-based Mode, Master-Initi-
ated MSG
E-19
DF1 Half-Duplex Master Standard
Mode, Master-Initiated MSG
E-16
DF1 Half-Duplex Slave Report-By-Ex-
ception MSG E-21
MicroLogix 1000 Analog
DF1 Half-Duplex Slave Report-by-Ex-
ception MSG E-14
PLC-5
DF1 Half-Duplex Master Mes-
sage-based Mode Master-initi-
ated MSG
E-10
DF1 Half-Duplex MasterStandard
Mode Master-initiated MSG
E-8
DF1 Half-Duplex Slave Report-by-Ex-
ception E-12
SLC
DF1 Half-Duplex Master Mes-
sage-based Mode Master-initi-
ated MSG
E-4
DF1 Half-Duplex Master Standard
Mode, Master-initiated MSG
E-2
DF1 Half-Duplex Slave Report-by-Ex-
ception E-6
SCADA
definition Glossary-5
Serial cables A-1
Serial port
definition Glossary-5
SLC 5/01 and 5/02 5-2
Configuring 5-3
Getting SLC 5/01 and 5/02 processors to
accept byte offsets 5-12
Installing 5-2
Installing 1747-KE 5-2
Messaging 5-11
Overview 5-1
SLC 5/02 1-6, 5-12
SLC 5/03, 5/04, and 5/05 4-1, 4-2, 4-43
Active stations, monitoring 4-17
Channel Status 4-16
Configuring
Channel 0 Poll Timeout 4-25
DF1 Half-Duplex 4-8
DF1 Half-Duplex Master
Message-based 4-18
Standard Mode 4-10
Minimum Channel 0 ACK Timeout
4-13
Minimum Point-to-Point MSG Block
Message Timeout 4-42
Minimum Slave MSG Block Mes-
sage Timeout 4-42
Point-to-Point 4-33
RTS Off Delay 4-8
RTS Send Delay 4-8
Slave Station 4-22
DF1 Full-Duplex
Channel Status 4-30, 4-35
Installing 4-2
Message
configuration considerations 4-38
Messaging 4-37
Examples 4-43
Master Station to Slave Station
4-37
Message-based Polling Mode 4-39
Minimum Master MSG Block Mes-
sage Timeout 4-39