Rockwell Automation DAG6.5.8 APPLICATION GUIDE SCADA SYSTEM - Manual (Page 411)

Publication AG-UM008C-EN-P - February 2005
Index
Numerics
1747-KE 1-7, 5-1, 5-4, 5-5, 5-8, 5-11
Addressing
Group size 1-7
Configuring 5-7, 5-9
SLC 5/01 and 5/02 processors with a
5-1
Error detection 5-8
Handshaking 5-8
Installing 5-2
Jumper settings 5-11
Local mode 5-8
Message retries 5-8
Modem init string 5-8, 5-10
Poll timeout 5-8
Remote mode 5-8
RTS signals 5-8
Station address 5-9
Timeout
polling 5-8
A
ACK
definition Glossary-1
ACK timeout
MicroLogix 1100/1200/1500 3-34
SLC 5-10
SLC 5/03, 5/04 or 5/05 4-35
Addressable words in a
SLC-5/02 5-12
Addressing
considerations 1-6
defining for MicroLogix 1100/1200/1500
3-13, 3-21, 3-23
defining for SLC 5/01 and 5/02 5-9
defining for SLC 5/03, 5/04, and 5/05
4-12, 4-20, 4-23
DH-485 5-6
MicroLogix 1000 1-6
SLC 5/02 1-6
SLC 500 processors 1-7
ASCII strings 10-5
Asynchronous transmission Glossary-1
B
Baud rate
DH-485 5-6
MicroLogix 1100/1200/1500 3-13,
3-21, 3-23, 3-28, 3-34
SLC 5/01 and 5/02 remote station 5-5
SLC 5/03, 5/04, and 5/05 4-12, 4-20,
4-23, 4-28, 4-34
BCC 3-13, 3-21, 3-23, 3-28, 3-34,
4-12, 4-21, 4-23, 4-29, 4-35
definition Glossary-1
Bits per character 5-5
Bridge
definition Glossary-1
Byte offset 5-12
C
Cables
25-pin to 25-pin A-1
9-pin to 25-pin A-1
Enhanced PLC-5 pinouts 2-2
Logix cable pinouts 7-3
MicroLogix 1000 cable pinouts 6-3
MicroLogix 1200/1500 Channel 0 pinouts
3-3
MicroLogix 1500 LRP Channel 1 pinouts
3-5
processor to modem A-1
SLC 5/03, 5/04, and 5/05 pinouts 4-2
SLC 500 with 1747-KE pinouts 5-3
workstation to modem A-1
Channel 0
MicroLogix 1100/1200/1500 full-duplex
station 3-27, 3-28, 3-33,
3-34
MicroLogix 1100/1200/1500 remote
station 3-21, 3-23, 3-40
SLC 5/03, 5/04 or 5/05 remote station
4-41
SLC 5/03, 5/04, and 5/05 full-duplex
station 4-28, 4-34
SLC 5/03, 5/04, and 5/05 remote station
4-20, 4-23
channel configuration
Modbus RTU Slave parameters 3-49
Checksum 5-8
Classic PLC-5 processor Glossary-1
Common interface file 5-12
Communication
configuring MicroLogix 1100/1200/1500
full-duplex station 3-27,
3-28, 3-33, 3-34
configuring MicroLogix 1100/1200/1500
remote station 3-21, 3-23,
3-40
configuring SLC 5/03, 5/04 or 5/05
remote station 4-41