Rockwell Automation DAG6.5.8 APPLICATION GUIDE SCADA SYSTEM - Manual (Page 111)

Publication AG-UM008C-EN-P - February 2005
Configuring MicroLogix 1100/1200/1500 Controllers 3-43
slave station. For a Logix slave station, a tag name would have to
already have been mapped to N19.
Figure 3.8 Read MSG from a MicroLogix 1100/1200/1500 controller to a PLC-5
Processor or Logix Controller.
This MSG example tells the MicroLogix 1100/1200/1500 master station
to read the information from PLC-5 slave station 11
10
’s N19:1 and
place the information in master station file N9:0. For a Logix slave
station, a tag name would have to already have been mapped to N19.