Rockwell Automation DAG6.5.8 APPLICATION GUIDE SCADA SYSTEM - Manual (Page 184)

Publication AG-UM008C-EN-P - February 2005
4-46 Configuring SLC 5/03, 5/04, and 5/05 Processors
In this example, the SLC master station is issuing a write request
through its serial port (channel 0) to SLC station 13
10
. The master
station wants to write the information from S:37 into station 13
10
’s file
N7:0.
Figure 4.9 Read MSG from an SLC 5/03, 5/04, or 5/05 Processor to Another SLC 500
or MicroLogix Controller
MSG being sent to another
SLC 500 or a MicroLogix
controller