Rockwell Automation DAG6.5.8 APPLICATION GUIDE SCADA SYSTEM - Manual (Page 16)

Publication AG-UM008C-EN-P - February 2005
2 Preface
Contents of this Manual Refer to the following listing for the contents of this user manual.
Chapter Title Contents
1 Designing
Communication Design and configuration choices for
getting information to and from slave
stations.
2 Configuring Enhanced
PLC-5
®
Processors
Set up an enhanced PLC-5 processor as a
master station, slave station, or a station on
a point-to-point link.
3 Configuring MicroLogix™
1100/1200/1500
Controllers Set up a MicroLogix 1100/1200/1500
controller as a master station, slave station,
or a station on a point-to-point link.
4 Configuring SLC™ 5/03,
5/04, and 5/05
Processors Set up an SLC 5/03, 5/04, and 5/05
processor as a master station, slave station,
or a station on a point-to-point link.
5 Configuring SLC™ 500
Processors with 1747-KE
Interface Modules Set up an SLC 500 fixed or modular
processor (SLC 5/01 or 5/02) with a 1747-KE
as a remote station, or a station on a
point-to-point link.
6 Configuring MicroLogix
1000 Controllers Set up a MicroLogix controller as a slave
station, or a station on a point-to-point link.
7 Configuring Logix
Controllers Set up Logix controllers as a master station,
slave station, or a station on a
point-to-point link.
8 Configuring Modems Provides information on connecting
modems to Allen-Bradley devices.
9
Configuring RSLinx
®
Classic Software for DF1
Half-Duplex
Communications
Provides reference information needed
while configuring RSLinx Classic
communication server software as a DF1
half-duplex polling master station or as a
DF1 half-duplex slave station.
10 Using Dial-up Telephone
Communication Provides information on how to set up and
initiate dial-up communication.
11 Remotely Programming
Allen-Bradley Processors
Over a Telemetry
Network Provides information on how to set up and
configure RSLogix programming terminals
on Ethernet to program remote processors.
A Modem Cable Reference Provides cable information.
B Basic DF1 Protocol
Troubleshooting Provides information on how to
troubleshoot communication errors.
C Third-Party Supplier
Contact Information Provides 3rd party vendor contact
information.
D Worksheets Provides worksheets to document your
serial channel configurations.
E Sample Ladder Logic Provides information for developing your
messaging logic.
Glossary