Rockwell Automation DAG6.5.8 APPLICATION GUIDE SCADA SYSTEM - Manual (Page 168)

Publication AG-UM008C-EN-P - February 2005
4-30 Configuring SLC 5/03, 5/04, and 5/05 Processors
DF1 Radio Modem Channel Status
Channel Status data is stored in the diagnostic file defined on the
Channel 0 Configuration screen. See Table 4.8 for information
regarding the diagnostic counter data displayed.
1. Double-click on the Channel
Status icon Located beneath
the Configuration icon to bring
up the Channel Status screen.
2. See Table 4.8 for details
concerning the DF1 Radio
Modem Channel Status
Screen.
Table 4.8 SLC 5/03 and Higher Channel 0 DF1 Radio Modem Channel Status
Status Field Diagnostic File Location Definition
Messages Sent word 1 The total number of DF1 messages sent by the processor
Messages Received word 2 The number of messages received with no errors
Lack of Memory/Packet
Dropped word 8 The number of times the processor could not receive a message because
it did not have available memory
Lost Modem word 12 The number of times the lost modem bit has gone low to high
Undelivered Messages word 3 The number of messages that could not be sent by the processor because
of incorrect modem handshaking conditions