Rockwell Automation DAG6.5.8 APPLICATION GUIDE SCADA SYSTEM User Manual
Page 413
Publication AG-UM008C-EN-P - February 2005
Index 3
E
Embedded responses
MicroLogix 1100/1200/1500
SLC 5/01 and 5/02
SLC-5/03, 5/04, and 5/05
Enhanced PLC-5
Active stations
monitoring
Channel Status
Master
Point-to-Point
Slave
Configuring
DF1 Half-Duplex Master
Message-based Mode
Standard Mode
Master Station
Message-based
Point-to-Point
Diagnostic file
Installing
Master Station
communication parameters
Messaging
considerations
Examples
processor-to-processor
Report-by-exception
Polling list
creating
Polling mode
Slave Station
Configuring
Station lists
creating
Enhanced PLC-5 processor
ENQ Retries
MicroLogix 1100/1200/1500
SLC-5/03, 5/04 or 5/05
Enquiry retries
EOT
definition
EOT suppression
Error detection
MicroLogix 1100/1200/1500
SLC 5/01 and 5/02
SLC 5/03, 5/04, and 5/05
Ethernet PLC-5 processor
Example
active station file
MicroLogix 1100/1200/1500 controller
write MSG to a PLC-5
MicroLogix 1100/1200/1500 controller
write MSG to SLC 500 controller
MicroLogix 1100/1200/1500 read MSG
to a PLC-5 or Logix controller
MicroLogix 1100/1200/1500 read MSG
to another SLC 500 or
MicroLogix controller
polling
SLC 5/01 and 5/02 read MSG to SLC 500
SLC 5/01 and 5/02 write MSG to SLC-500
SLC 5/02 read MSG to PLC-5
SLC 5/02 write MSG to PLC-5
SLC 5/03, 5/04 or 5/05 read MSG to a
PLC-5 processor or Logix
controller
SLC 5/03, 5/04 or 5/05 read MSG to
another SLC 500 MicroLogix
controller
SLC 5/03, 5/04 or 5/05 write MSG to a
PLC-5
SLC 5/03, 5/04 or 5/05 write MSG to
another SLC 500 or a MicroLogix
controller
Extended Local PLC-5 processor
F
Full-duplex
Full-duplex circuit
Full-duplex modem
Full-duplex packet exchanges
Full-duplex protocol
Full-duplex station
G
Group number
SLC 5/01 and 5/02
H
Half-duplex