Rockwell Automation DAG6.5.8 APPLICATION GUIDE SCADA SYSTEM - Manual (Page 288)

Publication AG-UM008C-EN-P - February 2005
8-22 Configuring Modems
with some interference. The amount of interference is directly
proportional to the number of users in the area.
You can use radio modems for either point-to-point or
point-to-multipoint applications. When communicating with
Allen-Bradley programmable controllers, configure radio modems
according to:
•
the cable assignments listed here
•
the switch and settings listed here
•
your application
Figure 8.13 Typical Configuration using Radio Modems and Allen-Bradley
processors
For information about these vendor’s products See page
DATA-LINC GROUP 8-23
Electronic Systems Technology (ESTeem) 8-29
Microwave Data Systems (MDS) 8-35
remote site A remote site B remote site C
DH+ link
41211