Rockwell Automation DAG6.5.8 APPLICATION GUIDE SCADA SYSTEM - Manual (Page 366)

Publication AG-UM008C-EN-P - February 2005
D-10 Worksheets
Worksheet 3.2
MicroLogix 1100/1200/1500
DF1 Half-Duplex Master
Station Configuration Using
Message-based
Communication
Use this worksheet to record your station’s configuration. For
descriptions of each line item, see Table 3.4 on page 3-21.
Page 1 of 1
Tab Parameter Example Your Configuration
Chan. 0 (1100/1200/1500
LSP)
Chan. 1 (1500 LRP)
Baud Rate 9600
Parity NONE
Node Address 99
Control Line HALF-DUPLEX WITHOUT MODEM
Error Detection CRC
Polling Mode MESSAGE BASED (ALLOW SLAVE TO
INITIATE MESSAGE)
Duplicate Packet Detect Enabled
Reply Message Wait
Timeout 1
ACK Timeout 50
RTS Off Delay (x 20 ms) 0
RTS Send Delay (x 20 ms) 0
Message Retries 3
Pre-Transmit Delay (x 1 ms) 0