Rockwell Automation DAG6.5.8 APPLICATION GUIDE SCADA SYSTEM - Manual (Page 289)

Publication AG-UM008C-EN-P - February 2005
Configuring Modems 8-23
DATA-LINC Group Use the following table to determine which DATA-LINC radio modem
you need. Refer to
Table 8.25 for cabling information . Consult
DATA-LINC for specific information regarding the installation of
DATA-LINC products.
SRM6000/6100/6200E
The DATA-LINC SRM6000, SRM6100 and SRM6200E are license-free
spread spectrum frequency hopping wireless modems that can
interface with Allen-Bradley PLCs. The modems can be configured as
master, remote, or repeater (SRM6000/6100 only) and data
communications are asynchronous. Baud rates can be set as high as
115.2K.
Table 8.21 DATA-LINC Radio Modem
Spread-spectrum
Frequency Topology A-B Protocol Maximum
Distance
Line-of-Sight DATA-LINC
Model #
902-928 MHz Point-to-Point DF1 Full-duplex 20 miles SRM 6000
Point-to-Multipoint DF1 Half-duplex
SRM 6000-SLC
(2)
SRM 6000-PLC
(3)
2400-2484 MHz Point-to-Point DF1 Full-duplex 7 miles SRM 6100
Point-to-Multipoint DF1 Half-duplex
SRM 6100-SLC
(2)
SRM 6100-PLC
(3)
902-928 MHz Point-to-Point
Ethernet
(1) 15 miles SRM 6200E
Point-to-Multipoint
SRM 6200E-SLC
(2)
SRM 6200E-PLC
(3)
(1) 10BASE-T connector
(2) 1746 chassis mount
(3) 1771 rack mount
TIP
For additional modem specifications consult your
DATA-LINC user documentation or
www.data-linc.com