Rockwell Automation DAG6.5.8 APPLICATION GUIDE SCADA SYSTEM - Manual (Page 265)

Publication AG-UM008C-EN-P - February 2005
Configuring Logix Controllers 7-39
00F0 000C F00C Requested function is not available
00F0 000D F00D Request is redundant
00F0 000E F00E Command cannot be executed
00F0 000F F00F Overflow; histogram overflow
00F0 0010 F010 No access
00F0 0011 F011 Data type requested does not match data available
00F0 0012 F012 Incorrect command parameters
00F0 0013 F013 Address reference exists to deleted area
00F0 0014 F014 Command execution failure for unknown reason
PLC-3 histogram overflow
00F0 0015 F015 Data conversion error
00F0 0016 F016 The scanner is not available to communicate with a 1771 rack adapter
00F0 0017 F017 The adapter is no available to communicate with the module
00F0 0018 F018 The 1771 module response was not valid
00F0 0019 F019 Duplicate label
00F0 001A F01A File owner active - the file is being used
00F0 001B F01B Program owner active - someone is downloading or editing online
00F0 001C F01C Disk file is write protected or otherwise not accessible (offline only)
00F0 001D F01D Disk file is being used by another application
Update not performed (offline only)
R9.x and earlier R10.x and later Description
.ERR .EXERR .ERR .EXERR