Rockwell Automation DAG6.5.8 APPLICATION GUIDE SCADA SYSTEM - Manual (Page 113)

Publication AG-UM008C-EN-P - February 2005
Configuring MicroLogix 1100/1200/1500 Controllers 3-45
Figure 3.10 Read MSG from a MicroLogix 1100/1200/1500 controller to an SLC 500
or MicroLogix Controller
In this example, the MicroLogix master station is issuing a read
request through its serial port to SLC station 13
10
. The master station
reads the information from station 13
10
’s file S:1 and puts that
information into its own N9:0 file.