Rockwell Automation DAG6.5.8 APPLICATION GUIDE SCADA SYSTEM - Manual (Page 203)

Publication AG-UM008C-EN-P - February 2005
Configuring SLC 500 Processors with 1747-KE Interface Modules 5-17
Figure 5.10 Read MSG instruction from an SLC 5/02 processor to an SLC 500
processor.
In this example, SLC 5/02 station 3 is issuing a read request, through a
1747-KE module whose DH-485 node address is 13
10
, to an SLC 5/03
processor.
Station 3 reads the information from station 13
10
’s data files N9:0 to
N9:5 and puts that information into its own N10:0 to N10:5.
ladder rung
setup screen