Rockwell Automation DAG6.5.8 APPLICATION GUIDE SCADA SYSTEM - Manual (Page 226)

Publication AG-UM008C-EN-P - February 2005
6-22 Configuring MicroLogix 1000 Controllers
Figure 6.8 Read MSG Instruction from a MicroLogix 1000 Controller to a
MicroLogix, SLC 500 or Logix Controller
In this example, MicroLogix 1000 station 3 is issuing a read request to
station 13
10
.
Station 3 reads the information from station 13
10
’s data files N7:0-N7:5
and puts that information into its own N7:10-N7:15.
For a Logix controller, a controller-scoped tagname must be mapped
to N7.
ladder rung
setup screen