Rockwell Automation DAG6.5.8 APPLICATION GUIDE SCADA SYSTEM - Manual (Page 45)

Publication AG-UM008C-EN-P - February 2005
Configuring Enhanced PLC-5 Processors 2-7
Displaying System (Master) Channel Status
Polling Normal Poll Node
File Enter an unused integer file that will store the addresses of the slave stations you want in the
normal poll list.
Normal Poll Group
Size Enter the quantity of active stations located in the normal poll list that you want polled during
a scan through the normal poll list before returning to the priority poll list.
Priority Poll Node
File Enter an unused integer file that will store the addresses of the slave stations you want in the
priority poll list.
Active Station File Enter an unused binary file that will store the status of all the stations in your network
configuration. The file stores one station address per bit.
0
=
inactive; 1
=
active.
RSLogix 5 Tab Parameter Selections
1. To display Channel Status,
double-click on Channel
Status, which is located
within Channel Configuration.
2. To access the various channels
from the Channel Status
screen, click on the tabs.
Descriptions of the status
screen fields can be found in
Table 2.2.