beautypg.com

Rockwell Automation DAG6.5.8 APPLICATION GUIDE SCADA SYSTEM User Manual

Page 336

background image

Publication AG-UM008C-EN-P - February 2005

11-6 Remotely Program Allen-Bradley Processors Over a Telemetry Network

Figure 11.8 RSWho Browse to Channel 0, DF1

Right-click on this Channel 0, DF1 network and select Properties.
Under Browse Addresses, enable the Browse only the specified
addresses box and enter in the range of addresses to browse.

Figure 11.9 Setting Range of DF1 Addresses to Browse

Now, left-click on the Channel 0, DF1 network to begin browsing this
range of DF1 addresses.

Figure 11.10 RSWho Browse Using SLC 5/05 Passthru

IMPORTANT

SLC 5/05 passthru does not work with the RSLinx
AB_ETHIP EtherNet/IP driver.