beautypg.com

Rockwell Automation DAG6.5.8 APPLICATION GUIDE SCADA SYSTEM User Manual

Page 338

background image

Publication AG-UM008C-EN-P - February 2005

11-8 Remotely Program Allen-Bradley Processors Over a Telemetry Network

Figure 11.11 Setting Range of DF1 Addresses to Browse

Now, left-click on the Channel 0, DF1 network to begin browsing this
range of DF1 addresses.

Figure 11.12 RSWho Browse Using Logix Bridging

Once RSWho can browse the remote node, then you can use either
RSLogix 5, RSLogix 500 or RSLogix 5000 programming software to
upload, download and go online with that remote PLC-5, SLC,
MicroLogix or Logix node.