Rockwell Automation DAG6.5.8 APPLICATION GUIDE SCADA SYSTEM - Manual (Page 309)

Publication AG-UM008C-EN-P - February 2005
Configuring RSLinx Classic Software for DF1 Half-Duplex Communications 9-3
Figure 9.2 Define Polling Lists
Table 9.2 Define Polling Lists Parameter Description
Control Control Text
Priority Stations Stations defined as Priority are polled during every polling cycle. All Priority Stations are polled, and then
one Normal Station is polled. All Priority Stations are polled again, and then another Normal Station is
polled. This cycle continues until all Normal Stations are polled.
Priority Stations Displays the current list of Priority Stations.
Add Click this button to add a station to the Priority Stations list.
Delete Click this button to delete a station from the Priority Stations list.
Move Click this button to move a station from the Priority Stations list to the Normal Stations list.
Normal Stations Stations defined as Normal are polled one at a time after each Priority Stations polling cycle. All Priority
Stations are polled, and then one Normal Station is polled. All Priority Stations are polled again, and then
another Normal Station is polled. This cycle continues until all Normal Stations are polled.
Normal Stations Displays the current list of Normal Stations.
Add Click this button to add a station to the Normal Stations list.
Delete Click this button to delete a station from the Normal Stations list.
Move Click this button to move a station from the Normal Stations list to the Priority Stations list.