Rockwell Automation DAG6.5.8 APPLICATION GUIDE SCADA SYSTEM - Manual (Page 253)

Publication AG-UM008C-EN-P - February 2005
Configuring Logix Controllers 7-27
Figure 7.7 Viewing Remote DF1 Diagnostic Counters
6. Enter in 1, s for the
Path, where s is
the slot number of
this controller (slot
0 in this example).
7. Create a message
instruction to read
remote Diagnostic
Counter system
values.
8. Enter in the field
values exactly as
shown, using the
DF1 diagnostic
counter storage
tag created
previously for the
Destination field.