Apple Soundtrack Pro 2 - Manual (Page 287)

Chapter 8 Basic Mixing in Soundtrack Pro 287
To make a send a post-fader send:
m Click the disclosure triangle for the send in the Effects tab, then select the On button
next to Post-Fader.
Reordering Sends in the Mixer
You can reorder sends in the Mixer as well as in the Effects tab. When you reorder sends,
you change which effects are routed to the send, which can change the sound drastically.
To reorder a send in the Mixer:
m Drag the send up or down in the effects slot area to change its order.
Showing Send Settings
You can show the settings for a send in the Effects tab. Send settings include volume,
pan, and the bus to which the send is routed.
To show settings for a send:
m In the Mixer, Control-click the send, then choose Show Send Settings from the
shortcut menu.
The Effects tab becomes active, with the settings for the send visible in the Effect
Parameters area.
Turning Sends Off and On
You can turn sends off, and turn them back on. When you turn off a send, the audio is
not routed to the send bus, and is not heard.
To turn off a send in a channel strip, do one of the following:
m Deselect the checkbox to the left of the send name.
m Control-click the send, then choose Disable Send from the shortcut menu.
To turn on an effect again:
m Select the checkbox to the left of the effect name.