Removing channel strips – Apple Soundtrack Pro 2 User Manual
Page 283
Chapter 8
Basic Mixing in Soundtrack Pro
283
At the top of each set of level meters is a peak indicator. As the project plays, the value
in decibels of the highest level reached appears in the peak indicator. If the level rises
above 0 dB, the peak indicator becomes red. The values shown in each peak indicator
remain until you play the project again, close the project, or reset the peak indicator.
To reset a peak indicator:
m
Click the peak indicator.
To reset all peak indicators, do one of the following:
m
Option-click the peak indicator in any channel.
m
Click the Reset button in the Meters tab.
The peak indicators can help identify where clipping occurs in the project. For
information about removing clipping, see “
Setting the Overall Project Volume Level
Removing Channel Strips
You can remove a channel strip from the Mixer if you decide you no longer want it in
the project.
To remove a channel strip, do one of the following:
m
Select the channel strip, then choose Multitrack > Remove [item].
m
Control-click the channel strip, then choose Remove [item] from the shortcut menu.
The term indicated by [item] changes in the menu depending on whether a track, bus,
or output is selected.
Note: If audio from a track is sent to a bus or output, and you remove the bus or
output, the audio from the track will not be heard when you play the project.
Level meters
Peak indicator