Figure 122: custom events, Selecting the power on command, Figure 123: custom events – Kramer Electronics WP-501 User Manual
Page 79: Command added to the action list, Figure 124: custom events, Add a new trigger

74
K-Config - Using the Triggers
2.
In the Action Editor, select a Port Command:
Figure 122: Custom Events
– Selecting the Power On Command
3.
Click the Add to List button.
The command is added to the Device Startup trigger
Figure 123: Custom Events
– Command added to the Action List
4.
In the same way, add all the relevant commands to the Device Startup trigger.
The trigger appears bold in the list.
To add a new custom event:
1.
Select Custom Events.
Figure 124: Custom Events
– Add a New Trigger